A contractor quotes you $18,000 to replace wall ties in your Federation terrace.
Cavity wall tie replacement involves removing failed metal ties that connect your outer brick leaf to the inner wall, then installing corrosion-resistant stainless-steel replacements. In Sydney’s older masonry buildings, particularly Federation terraces and heritage structures, these ties corrode over time, crack mortar joints, bow façades, and threaten structural stability. The work requires brick removal or drilling at each tie point, structural assessment, and careful reinstatement. What separates a quote worth signing from one that will cost you double is whether it accounts for access, engineering, heritage requirements, and what actually happens when the contractor opens up the wall.
Key Takeaways
- A low per-tie rate without access, engineering or brick-replacement allowances signals future cost blowouts
- Quotes that assume no additional ties will be found omit the reality of concealed corrosion
- Heritage buildings need lime mortar, matched bricks and council approvals, standard quotes rarely include them
- Scaffolding, traffic management and lane access can double the quoted figure on narrow-site terraces
- A structural engineer’s report is mandatory for façade movement but often listed as an optional extra
The Per-Tie Rate Trap: When a Low Figure Hides the Real Scope
Many quotes present a tidy per-tie installation rate and multiply it by a tie count pulled from a visual survey. You see a figure that looks reasonable, and you sign. The problem surfaces when the contractor removes the first brick and discovers twice as many failed ties as the quote assumed, or finds that half the ties are accessible only by removing entire sections of render, or that the mortar around each tie point has deteriorated so badly that brick replacement becomes unavoidable.
A proper quote states the per-tie rate clearly but also includes an allowance for additional ties discovered during the work, a clause covering brick replacement where ties have pulled through the bed joint, and a line item for mortar reinstatement around each access point. If the quote gives you one figure per tie and says nothing about what happens when the real scope becomes clear, you’re looking at a number that will change the moment work starts. Sydney Federation terraces routinely contain more failed ties than a walk-past assessment reveals, because corrosion happens inside the cavity where it’s invisible until the wall is opened.
Ask the contractor how many ties the quote assumes, how that number was derived, and what the quote allows for variations. If the answer is vague or defensive, the quote is undercooked. A contractor who has done this work before knows that the final tie count often exceeds the initial estimate, and prices accordingly. One who quotes a fixed price for an assumed count with no contingency is either inexperienced or planning to charge you variations once access is established.
What Access, Engineering and Approvals Actually Cost
The second red flag appears in what the quote leaves out entirely. Scaffolding, traffic permits, structural engineering and heritage approvals are not minor add-ons, they’re often the difference between a straightforward repair and a project that drags out for months. A quote that lists tie replacement but omits these items is missing half the work, and you’ll fund the difference through variations or delayed timelines.
Scaffolding on a two-storey terrace in Sydney’s Eastern Suburbs can represent a substantial portion of the total budget, particularly when the site sits on a narrow lane with restricted vehicle access or when council requires traffic management for street scaffolding. A quote that says “scaffolding to be arranged separately” or “client to supply access” is offloading a major cost and a major headache onto you. The contractor knows scaffolding is essential but doesn’t want the figure in the quote.
Structural engineering certification is mandatory when façade movement, bulging brickwork or cracked lintels accompany the tie failure. NSW Fair Trading requires Home Warranty Insurance for building work over $20,000, and most insurers require an engineer’s report before they’ll cover structural masonry repairs. A quote that treats engineering as optional or an extra is either underestimating the severity of the failure or planning to spring the requirement on you once work starts. If your brickwork shows horizontal cracking, stepped cracks or visible bowing, engineering isn’t optional, it’s part of the job.
Heritage approvals add another layer. If your building sits on the State Heritage Register or within a conservation area, altering the façade, even to repair failed ties, may require a heritage assessment, a Section 60 approval, or consultation with the local council’s heritage advisor. A quote that ignores this reality is written by someone unfamiliar with heritage work or unwilling to deal with the paperwork. Either way, you’ll bear the cost and the delay when the council stops the job mid-project.
| What a thorough quote includes | What an undercooked quote omits |
|---|---|
| Scaffolding, traffic permits, site access allowances | “Scaffolding to be arranged separately” |
| Structural engineer’s report and certification | “Engineering available as optional extra” |
| Heritage approvals, Section 60 application support | No mention of council or heritage requirements |
| Lime mortar, matched heritage bricks, tuckpointing | Generic mortar, standard bricks, basic repointing |
| Contingency for additional ties found during work | Fixed price based on initial visual survey only |
Cavity wall tie replacement in Sydney
We've been doing this for 30 years. Call us to discuss what your property actually needs.
© OpenStreetMap contributors

Materials, Methods and the Heritage Premium
The third set of red flags lives in the materials and methods the quote assumes. A contractor who quotes stainless-steel ties, lime mortar and hand-matched Federation bricks is pricing a different job to one who quotes galvanised ties, cement mortar and standard bricks from the hardware store. The first delivers a repair that respects the building’s heritage character and lasts another century. The second delivers a repair that may fail again within a generation and leaves the brickwork visibly patched.
Stainless-steel ties outlast galvanised ties in cavity wall environments. Galvanised ties corrode after several decades, which is why you’re replacing the originals in the first place. A quote that doesn’t specify stainless steel or that offers galvanised ties as the standard option is cutting corners on the component that matters most. The tie is the entire point of the repair, saving a small amount on material while accepting a shorter lifespan makes no sense for a structural component buried inside the wall.
Lime mortar is the correct material for heritage brickwork, not cement mortar. Lime allows the masonry to breathe, accommodates minor movement, and matches the original mortar’s performance and appearance. Cement mortar is harder, traps moisture, and creates a visual mismatch that screams “repair” from the street. A quote that doesn’t mention lime mortar or tuckpointing for a Federation building is written by someone unfamiliar with heritage work or unwilling to source the right materials. For more on why this matters, see this breakdown of what to ask before committing to wall tie replacement.
Matched bricks are another dividing line. When ties pull through the bed joint or when access requires removing entire bricks, the reinstatement bricks need to match the original in colour, texture and size. A quote that doesn’t address brick sourcing or that assumes standard bricks will suffice is underestimating the visual impact of mismatched replacements. Reclaimed Federation bricks exist, but they’re not free, and they’re not always available in the quantity you need. A contractor who hasn’t priced for matched bricks is planning to patch your façade with whatever the supplier has in stock, and the result will be obvious from the footpath.
Get a Quote That Reflects the Real Job
A cavity wall tie replacement quote should answer three questions before you read the price: what is included, what happens when the scope changes, and who manages the approvals and access. If any of those answers are missing or vague, the quote is incomplete. The cheapest quote is rarely the best value when it omits scaffolding, engineering, heritage materials and contingency allowances. The thorough quote may look higher on page one, but it’s the one that delivers the job on time, on budget, and without mid-project surprises.
Premier Pointing works exclusively on heritage masonry restoration in Sydney, and we write quotes that account for what actually happens when you open up a Federation terrace wall. Our quotes separate investigation, tie installation, brick reinstatement, repointing and access into distinct line items, include structural engineering where façade movement is evident, and allow for the additional ties that nearly every project uncovers. If you’re comparing quotes and one looks too cheap to be true, it probably is. Get in touch and we’ll walk you through what a thorough quote should include for your building.
Frequently Asked Questions
How urgent is wall tie replacement?
Wall tie failure is a structural issue that worsens over time. Corroded ties crack mortar, bow façades and eventually allow the outer brick leaf to separate from the inner wall. If you see horizontal cracking, bulging brickwork or stepped cracks around bed joints, the failure is already advanced and repair is urgent. Delaying replacement increases both the scope and the cost as additional ties fail and more brickwork requires stabilisation.
What happens if cavity wall ties fail?
Failed ties lose their ability to anchor the outer brick leaf to the inner wall. The brickwork becomes unstable, cracks appear at bed joints where ties have corroded and expanded, and the façade may bow outward under wind load or thermal movement. In extreme cases the outer leaf can collapse, though cracking and bulging typically provide warning well before that point. Movement accelerates once ties fail because the remaining sound ties carry increased load.
Is wall tie failure covered by insurance?
Standard building insurance typically excludes gradual deterioration, wear and tear, and maintenance issues, which is how most insurers classify wall tie corrosion. Coverage may apply if tie failure causes sudden structural damage, such as a collapsed section of brickwork, but the underlying corrosion itself is usually excluded. Check your policy wording and speak to your insurer before assuming coverage. Most heritage building owners fund tie replacement as planned maintenance rather than an insured event.
How much does it cost to replace cavity wall ties?
The total depends on how many ties require replacement, access requirements, whether heritage materials and approvals are needed, and the extent of associated brickwork repair. Factors that increase the budget include scaffolding on multi-storey buildings, narrow-site access, structural engineering, lime mortar and matched heritage bricks, and council approvals for listed buildings. A thorough structural survey establishes the real scope before quoting, because concealed corrosion often exceeds what a visual inspection reveals.
Is replacing wall ties a big job?
The scale depends on the building and the failure extent. Isolated tie replacement on a single-storey wall may take a few days, while systematic replacement across a two-storey terrace façade involves scaffolding, structural assessment, heritage approvals and careful brick reinstatement. The work itself, drilling access, removing failed ties, installing stainless-steel replacements and repointing, is methodical rather than fast. Budget for disruption, noise and restricted access to the affected façade during the works.
What This Means for Cavity Wall Tie Replacement
A cavity wall tie replacement quote is only useful if it accounts for the real work. The lowest figure on paper rarely stays that way once scaffolding, engineering, additional ties and heritage approvals enter the picture. Look for a quote that separates access, materials, engineering and contingency into clear line items, specifies stainless-steel ties and lime mortar for heritage buildings, and answers the question of what happens when the contractor finds more failed ties than the survey assumed. That’s the quote worth signing, and the one that delivers a repair you won’t be redoing in another decade.
